Picture Station DPP-FP90 partial printing problem

[eric_suen]

4 photos

It has been a while since I used it last time.  When I took it out last night, 4 photos came out as shown in attached photo.  Photo count is 42, yes 42 only.  I firsted printed 2 and ran out of paper so put a new pile in and also changed the film cartridge but problem persists.  Any one experienced this problem, please?  Many thanks.

[EdwinaU]

Hi Eric,

Welcome to the community.

There is a help guide for this printer here that may have some useful information to help you with this issue, and a link to support if you cannot resolve it.

Best wishes,

EdwnaU

[wcndave · Accepted solution]

I have the same problem.  Did you manage to resolve it?

[eric_suen]

Sadly, no. Mine is still out of action, sorry.

[tommypentre]

Your printer has a broken cam on the printhead cam shaft.  This is a stock fault with these machines.  Replacement requires dismantling the machine and is quite a tedious job.  Spares are probably best sourced from a scrap machine or Sony.  I believe Sony have no stock but might be wrong!